Neo_kb

[Extra] Neo80 R2

Rp 3.061.000

1
2
3
4
5
6
7
8
9

Quantity:

Instock, ready to ship within 1-3 working days.
Available Kit:

Kit	Layout	Top Case	Bottom Case	Weight	PCB	Plate
1	WK	Anodized Green	Same as the top case	Mirror PVD Dusk Weight	Tri-mode Non-flex cut Hotswap PCB	ALU Plate
2	WK	Anodized Purple	Same as the top case	Stone-washed Black Weight	Tri-mode Non-flex cut Hotswap PCB	FR4 Plate
3	WKL	Anodized Silver	Same as the top case	Copper Weight	Tri-mode Non-flex cut Hotswap PCB	CF Plate
4	WK	Anodized Navy	Same as the top case	Mirror PVD Silver Weight	Tri-mode Non-flex cut Hotswap PCB	POM Plate
5	WK	Anodized Silver	Anodized Champagne Bottom	Spray-coated Golden Weight	Tri-mode Non-flex cut Hotswap PCB	CF Plate
6	WKL	Spray-coated Retro White	Same as the top case	Spray-coated Golden Weight	Tri-mode Non-flex cut Hotswap PCB	ALU Plate
7	WK	Anodized Red	Same as the top case	Spray-coated Golden Weight	Tri-mode Non-flex cut Hotswap PCB	ALU Plate
8	WKL	Anodized Champagne	Anodized Silver Bottom	Mirror PVD Dusk Weight	Tri-mode Non-flex cut Hotswap PCB	FR4 Plate
9	WK	Anodized Champagne	Same as the top case	Stone-washed Dark Golden Weight	Tri-mode Non-flex cut Hotswap PCB	POM Plate

HARAP DIBACA SEBELUM MEMBELI:

Pengiriman luar pulau wajib tambah Packing Kayu (kerusakan dan kehilangan barang bukan tanggung jawab Mechaland). Tambah Packing Kayu lewat link ini: https://mechaland.id/products/packing-kayu.
Wajib video unboxing, kami tidak akan terima jika ada masalah dengan order tanpa video unboxing.
Hanya 1 keyboard kit per order. Jika ingin membeli lebih dari 1, bisa buat order baru setelah pembelian sebelumnya berhasil. Jika membeli extra parts, harap jangan dipisah dan jadikan 1 order bersama dengan keyboard kit. Extra parts bisa dibeli dari sini: https://mechaland.id/products/extra-neo80-extra-parts

Product Warranty:

Void if the ownership is transferred (name on the invoice will be your proof of ownership).
1 year regarding PCB functionality (start from received the board).
<2mm tolerance of visible surfaces after built.
Cosmetic imperfections hidden after built on the PCB and plate are not covered.
For purchasing PCB only without case, we will only give 1 week guarantee regarding PCB functionality.
Complaint should be informed to us within 7 days after received the package and need unboxing video as proof. We won't accept any complaints without video proof.

More info about the keyboard here : https://qwertykeys.notion.site/Neo80-99a1e2a22bf54c29ba669289bd4bea68

What is inside :

Case (Top + Bottom)
- Including one pre-installed external weight of your choice
- Two 2200 mAh batteries will be installed inside of the bottom case for orders with Tri-mode PCBs
- Orders with wired PCBs or solder PCBs will receive fillers for the battery compartments
PCB kit
- PCB of your choice
- 1x PE sheet
- 1x PCB Foam
- Standoffs
- Tri-mode PCB comes with a 2.4Ghz dongle
Plate of your choice (or plateless with solder PCB)
Poron case foam
PCB Daughterboard - installed
Case corner protectors - installed
Gasket jackets + gasket dumbbells
Brass pillars + washers
O-ring (30 duro) x 1
Rubber feet
LED diffuser
Free Gifts (Not covered by warranty):
- Keyboard carrying case
- 1x Keycap & Switch puller
- 1 set of 80% PCB clip-in NeoStab
- USB-C cable

About Neo80 :

In addition to the iconic slim side bezels, we have rounded the top case chamfer to give the Neo80 a softer appearance. The F13 key has been removed to make the layout more practical for everyday use.

The RGB light is positioned slightly below the surface to reduce the brightness and make it less distracting during daily use.

Compared to compact keyboards, the 80% layout tends to be bulky. Therefore, we decided not to follow the same side profile as our previous products. The combination of curved edges and chamfers gives the Neo80 a softer and more dynamic side profile. The bottom case can be the same color as the top case, or customers can also choose a golden or silver bottom case to create a dual-tone vibe.

Effortless assembly is a fundamental concept of the Neo series, dating back to our first product. Due to the limitations of the 80% layout, we were unable to proceed with the unibody case design, so we decided to switch to the ball-catch structure as an alternative. However, all the existing ball-catch mechanisms are too large, requiring wide top and bottom bezels on the keyboard to accommodate them. Therefore, we have decided to design and produce our own ball-catch system for the Neo80, so that the design does not need to be compromised.

The size of the mechanisms, the number of balls, and the spring pressure have all been optimized based on the design of the Neo80. We also intentionally shifted the touchpoint of the ball to one side of the latch so that the lifespan of the entire system could be extended by reversing the direction of the latch